130 research outputs found
Epitaxial strain adaption in chemically disordered FeRh thin films
Strain and strain adaption mechanisms in modern functional materials are of
crucial importance for their performance. Understanding these mechanisms will
advance innovative approaches for material properties engineering. Here we
study the strain adaption mechanism in a thin film model system as function of
epitaxial strain. Chemically disordered FeRh thin films are deposited on W-V
buffer layers, which allow for large variation of the preset lattice constants,
e.g. epitaxial boundary condition. It is shown by means of high resolution
X-ray reciprocal space maps and transmission electron microscopy that the
system reacts with a tilting mechanism of the structural units in order to
adapt to the lattice constants of the buffer layer. This response explained by
density functional theory calculations, which evidence an energetic minimum for
structures with a distortion of c/a =0.87. The experimentally observed tilting
mechanism is induced by this energy gain and allows the system to remain in the
most favorable structure. In general, it is shown that the use of epitaxial
model heterostructures consisting of alloy buffer layers of fully miscible
elements and the functional material of interest allows to study strain
adaption behaviors in great detail. This approach makes even small secondary
effects observable, such as the directional tilting of the structural domains
identified in the present case study
Direct visualization of dynamic magnetic coupling in a Co/Py bilayer with picosecond and nanometer resolution
We present a combination of ferromagnetic resonance (FMR) with spatially and
time-resolved X-ray absorption spectroscopy in a scanning transmission X-ray
microscope (STXM-FMR). The transverse high frequency component of the
resonantly excited magnetization is measured with element-specifity in a
Permalloy (Py) disk - Cobalt (Co) stripe bilayer microstructure. STXM-FMR
mappings are snapshots of the local magnetization-precession with nm spatial
resolution and ps temporal resolution. We directly observe the transfer of
angular momentum from Py to Co and vice versa at their respective
element-specific resonances. A third resonance could be observed in our
experiments, which is identified as a coupled resonance of Py and Co.Comment: Version submitted to Physical Review Applied with updated author list
and supplemental information (Ancillary file
Biocompatible magnetic fluids of co-doped iron oxide nanoparticles with tunable magnetic properties
Magnetite (Fe3O4) particles with a diameter around 10 nm have a very low coercivity (Hc) and relative remnant magnetization (Mr/Ms), which is unfavorable for magnetic fluid hyperthermia. In contrast, cobalt ferrite (CoFe2O4) particles of the same size have a very high Hc and Mr/Ms, which is magnetically too hard to obtain suitable specific heating power (SHP) in hyperthermia. For the optimization of the magnetic properties, the Fe2+ ions of magnetite were substituted by Co2+ step by step, which results in a Co doped iron oxide inverse spinel with an adjustable Fe2+ substitution degree in the full range of pure iron oxide up to pure cobalt ferrite. The obtained magnetic nanoparticles were characterized regarding their structural and magnetic properties as well as their cell toxicity. The pure iron oxide particles showed an average size of 8 nm, which increased up to 12 nm for the cobalt ferrite. For ferrofluids containing the prepared particles, only a limited dependence of Hc and Mr/Ms on the Co content in the particles was found, which confirms a stable dispersion of the particles within the ferrofluid. For dry particles, a strong correlation between the Co content and the resulting Hc and Mr/Ms was detected. For small substitution degrees, only a slight increase in Hc was found for the increasing Co content, whereas for a substitution of more than 10% of the Fe atoms by Co, a strong linear increase in Hc and Mr/Ms was obtained. Mössbauer spectroscopy revealed predominantly Fe3+ in all samples, while also verifying an ordered magnetic structure with a low to moderate surface spin canting. Relative spectral areas of Mössbauer subspectra indicated a mainly random distribution of Co2+ ions rather than the more pronounced octahedral site-preference of bulk CoFe2O4. Cell vitality studies confirmed no increased toxicity of the Co-doped iron oxide nanoparticles compared to the pure iron oxide ones. Magnetic heating performance was confirmed to be a function of coercivity as well. The here presented non-toxic magnetic nanoparticle system enables the tuning of the magnetic properties of the particles without a remarkable change in particles size. The found heating performance is suitable for magnetic hyperthermia application. © 2020 by the authors. Licensee MDPI, Basel, Switzerland
Biocompatible magnetic fluids of Co-doped iron oxide nanoparticles with tunable magnetic properties
Magnetite (Fe3O4) particles with a diameter around 10 nm have a very low coercivity (Hc) and relative remnant magnetization (Mr/Ms), which is unfavorable for magnetic fluid hyperthermia. In contrast, cobalt ferrite (CoFe2O4) particles of the same size have a very high Hc and Mr/Ms, which is magnetically too hard to obtain suitable specific heating power (SHP) in hyperthermia. For the optimization of the magnetic properties, the Fe2+ ions of magnetite were substituted by Co2+ step by step, which results in a Co doped iron oxide inverse spinel with an adjustable Fe2+ substitution degree in the full range of pure iron oxide up to pure cobalt ferrite. The obtained magnetic nanoparticles were characterized regarding their structural and magnetic properties as well as their cell toxicity. The pure iron oxide particles showed an average size of 8 nm, which increased up to 12 nm for the cobalt ferrite. For ferrofluids containing the prepared particles, only a limited dependence of Hc and Mr/Ms on the Co content in the particles was found, which confirms a stable dispersion of the particles within the ferrofluid. For dry particles, a strong correlation between the Co content and the resulting Hc and Mr/Ms was detected. For small substitution degrees, only a slight increase in Hc was found for the increasing Co content, whereas for a substitution of more than 10% of the Fe atoms by Co, a strong linear increase in Hc and Mr/Ms was obtained. Mössbauer spectroscopy revealed predominantly Fe3+ in all samples, while also verifying an ordered magnetic structure with a low to moderate surface spin canting. Relative spectral areas of Mössbauer subspectra indicated a mainly random distribution of Co2+ ions rather than the more pronounced octahedral site-preference of bulk CoFe2O4. Cell vitality studies confirmed no increased toxicity of the Co-doped iron oxide nanoparticles compared to the pure iron oxide ones. Magnetic heating performance was confirmed to be a function of coercivity as well. The here presented non-toxic magnetic nanoparticle system enables the tuning of the magnetic properties of the particles without a remarkable change in particles size. The found heating performance is suitable for magnetic hyperthermia application
Doping of inorganic materials in microreactors – preparation of Zn doped Fe₃O₄ nanoparticles
Microreactor systems are now used more and more for the continuous production of metal nanoparticles and metal oxide nanoparticles owing to the controllability of the particle size, an important property in many applications. Here, for the first time, we used microreactors to prepare metal oxide nanoparticles with controlled and varying metal stoichiometry. We prepared and characterised Zn-substituted Fe₃O₄ nanoparticles with linear increase of Zn content (ZnxFe₃−xO₄ with 0 ≤ x ≤ 0.48), which causes linear increases in properties such as the saturation magnetization, relative to pure Fe₃O₄. The methodology is simple and low cost and has great potential to be adapted to the targeted doping of a vast array of other inorganic materials, allowing greater control on the chemical stoichiometry for nanoparticles prepared in microreactors
- …